UNITRONIC® BUS PB FD P A 1X2X0,64
Bus cable; PROFIBUS DP; Cable chain; Nominal characteristic impedance: 150; PUR; violet; cUL listed
Benefits
- Cables can be used for PROFIBUS-DP as well as PROFIBUS-FMS and FIP
- For use where the combination of a halogen-free outer sheath with properties similar to PUR and enhanced flame-retardance is required
Applications
- For highly flexible applications (power chains, moving machine parts)
- PROFIBUS DP (in accordance with DIN 19245 and EN 50170, e.g. for SIEMENS SIMATIC® NET, also suitable for FIP - Factory Instrumentation Protocol).
- Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG)
Technical Attributes
General Information
Brand
UNITRONIC®
Product type
Bus cable
Weight
58 kg/km
Copper index
30.100 kg/km
copper index (lb)
202.240 lb/10,000 ft
valid Fieldbus or Ethernet System
PROFIBUS DP
Electrical Characteristics
test voltage conductor/conductor
1.5 kV
Test voltage core/screening
1.5 kV
Min. insulation resistance
5 GΩ*km
Nominal characteristic impedance
150 Ω
Product Design
Conductor count/size
1X2X24AWG
Cable dimension
1X2X24 AWG
Conductor cross-section (mm2)
0.25 mm²
Nominal cross section conductor (AWG)
24 AWG
Nominal diameter conductor (mm)
0.64 mm
Number of wires
19
Conductor material
Bare Copper
Conductor design
19-wire
Including protective conductor
No
Number of cores
2
Number of pairs
1
Stranding type
Twisted-pair
additional stranding element
Drain Wire
Wrapping over stranding
Fleece wrapping
Shielded
Yes
Type of overall screen
Aluminium-laminated plastic foilTin-plated copper braiding
Wrapping above Screening
Fleece wrapping
With cable messenger
No
Nominal core diameter
2.55 mm
Nominal outer diameter
8 mm
Shape of cable
Round
Core insulation base material
Polyethylene foam
Core insulation base material, shortname
Foam-Skin PE
Base material of outer sheath
Polyurethane
Base material of outer sheath, shortname
PUR
Cable insulation colour
violet
Cable insulation RAL colour
RAL 4001
Core identification
Colours
Product Characteristics
Application area
Cable chain
For continuous flexing
Yes
For torsional load
Yes
Windable
No
Minimum bending radius, fixed installation
6 x outer diameter
Minimum bending radius in mm, stationary
48.0 mm
Minimum bending radius, dynamic permanently moved
8 x outer diameter
Minimum bending radius in mm, dynamic continuously flexing
64.0 mm
Minimum bending radius, occasionally moved
8 x outer diameter
Minimum bending radius in mm, occasionally flexing
64.0 mm
Torsion
for +/- 150 °/m and min. 5 °C up to 5000 Torsion cyclesfor +/- 150 °/m and min. -40 °C up to 2000 Torsion cycles
temperature, fixed installation
-40 °C to 80 °C
Temperature, occasionally moved
-40 °C to 75 °C
Flame-retardant
Yes
Flame retardance according to
UL VW-1
UV-resistant
Yes
UV-resistant according to
EN ISO 4892-2, method A (colour change permitted)
Halogenfree
Yes
Zero halogen according to
VDE 0472-815
Oil-resistant
Yes
PWIS-free
Yes
PWIS-free according to
VDMA 24364-B2-L
Fast Connect (FC) cable
No
Certifications and Standards
CE marked
No
EAC certified
Yes
EAC certification number
ЕАЭС N RU Д-DE.АЮ64.В.00130/20
UL recognised
Yes
UL listed
Yes
UL certification
UL CMX according to UL 444
cUR recognized
Yes
cUR certification
according to CSA C22.2 No. 214 (e-file number: E63634)
cUL listed
Yes
CSA certified
Yes
VDE certified
No
Documentation
-
Downloads
Further Links
-
Notes
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- SIMATIC® is a registered trademark of SIEMENS AG. FIP is a registered trademark of World FIP.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
Product Family List
All articles from UNITRONIC® BUS PB FD P A
| Article number | Conductor count/size | Copper index | Weight | |
|---|---|---|---|---|
| 2170822 | 1X2X24AWG | 30.100 kg/km | 58 kg/km |
