ÖLFLEX® SERVO FD 7DSL 4G0,75+(2x0,34)+...
Servo cable; 4G0,75+(2x0,34)+(2x26AWG); Extended-Line; U0/U: 0,6/1 kV; PUR; Shielded; UL recognised; Cable chain
Benefits
- Space-saving and weight-saving hybrid cable for simultaneous power supply, signal and data transmission (one-cable technology).
- Compatible with one-cable technology interfaces such as HIPERFACE DSL® and SCS open link.
- Allows space-saving installation without additional encoder cable. Instead of the encoder cable, integrated signal pairs, signal cores or star quad bundles take over the signal transmission.
- Reduced connection costs due to less cabling work and quick installation of fewer components.
- Highly flexible cable design means maximum product performance.
- Durable cable chain use with long travel distances or high acceleration (LAPP performance class “Extended Line”). This saves costs and increases the efficiency of machines.
- Low-capacitance core insulation for long transmission paths.
- Ideal protection against electromagnetic interference thanks to copper screening braiding with a high degree of coverage.
- UL/CSA certification according to technical data enables the product to be used in the North American market.
- Also available in versions with one screened control core pair, e.g. for brakes.
Applications
- For connecting frequency converters and servo motors.
- Especially for environments where electromagnetic compatibility (EMC) is required.
- The cable design allows highly flexible, continuously flexing use in moving machine parts and in the cable chain, with horizontal travel distances of up to 20 m.
- Can be used in dry, wet and especially in harsh and oily environments.
- The PUR outer sheath withstands high mechanical loads.
- The PUR outer sheath is resistant to mineral oil-based lubricants and highly resistant to chemicals.
- Suitable for outdoor use.
- Flexible use at temperatures down to -40°C.
Technical Attributes
General Information
Brand
ÖLFLEX®
Product type
Servo cable
Weight
170 kg/km
Copper index
97.000 kg/km
copper index (lb)
651.813 lb/10,000 ft
Performance class
Extended-Line
Electrical Characteristics
Nominal voltage
U0/U: 0,6/1 kV AC rms according to IEC
Nominal voltage power cores
U0/U: 0,6/1 kV AC rms according to IEC
Nominal voltage control cores
U0/U: 0,6/1 kV AC rms according to IEC
Signal pair nominal voltage
300 V AC rms / DC according to IEC
Rated voltage
1000 V AC rms according to UL AWM1000 V AC rms according to cRU AWM
Test voltage
4 kV
Power core test voltage
4 kV
test voltage control cores
4 kV
Current rating according to
VDE 0891-1
Nominal characteristic impedance
110 Ω
Maximum transmission length
100 m
Product Design
Conductor count/size
4G0,75+(2x0,34)+(2x26AWG)
Conductor cross-section (mm2)
0.75 mm²
Nominal cross section conductor (AWG)
19 AWG
Conductor material
Bare Copper
Conductor design
IEC 60228 class 6: extra-fine wire
Including protective conductor
Yes
Number of cores
4
Number of pairs
2
Pair screening type
Tin-plated copper braidingAluminium-steamed fleece
Cable element 1
Power core: 4G0.75
Cable element 2
Control core pair: 1x(2x0.34), Shielding: Tin-plated copper braiding
Cable element 3
Signal pair: 1x(2x26 AWG), Shielding: Tin-plated copper braiding
Stranding type
Layered Stranding
Wrapping over stranding
Fleece wrapping
Shielded
Yes
Type of overall screen
Tin-plated copper braiding
Nominal outer diameter
10.6 mm
Shape of cable
Round
Core insulation base material
Polypropylene
Core insulation base material, shortname
PP
Base material of outer sheath
Polyurethane
Base material of outer sheath, shortname
PUR
Cable insulation colour
orange
Cable insulation RAL colour
RAL 2003
Core identification
AlphanumericNumbersColours
Product Characteristics
Application area
Cable chainFlexible
For continuous flexing
Yes
Minimum bending radius, fixed installation
5 x outer diameter
Minimum bending radius in mm, stationary
53.0 mm
Minimum bending radius, dynamic permanently moved
7.5 x outer diameter
Minimum bending radius in mm, dynamic continuously flexing
79.5 mm
Minimum bending radius, occasionally moved
7.5 x outer diameter
Minimum bending radius in mm, occasionally flexing
79.5 mm
Maximum bending cycles
10000000
Maximum travel distance
20 m
Maximum speed sliding
5 m/s
Maximum speed unsupported
10 m/s
Maximum acceleration
50 m/s²
temperature, fixed installation
-50 °C to 90 °C according to IEC to 90 °C according to UL AWM to 90 °C according to CSA AWM
Temperature, occasionally moved
-40 °C to 90 °C according to IEC to 90 °C according to UL AWM to 90 °C according to CSA AWM
Temperature, dynamic continuously flexing
-40 °C to 90 °C according to IEC to 90 °C according to UL AWM to 90 °C according to CSA AWM
Flame-retardant
Yes
Flame retardance according to
CSA FT1
UV-resistant
Yes
UV-resistant according to
EN ISO 4892-2, method A (colour change permitted)EN 50618EN 50620
weather resistant
Yes
Ozone resistant
Yes
Ozone-resistant according to
EN 50396, method B
Chemical resistant
Yes
hydrolysis resistant
Yes
Halogenfree
Yes
Zero halogen according to
IEC 60754-1
Oil-resistant
Yes
Oil resistance according to
EN 50363-10-2
MUD resistance according to
IEC 60092-360, Annex C+D
PWIS-free
Yes
PWIS-free according to
VDMA 24364-B2-L
Low capacitance
Yes
Low-adhesion sheath surface
Yes
Certifications and Standards
CE marked
Yes
EAC certified
Yes
EAC certification number
ЕАЭС RU С-DE.АЮ64.В.00091/19
UL recognised
Yes
UL AWM certification
21209 according to UL 758 (e-file number: E63634)10989 according to UL 758 (e-file number: E63634)11117 according to UL 758 (e-file number: E63634)
UL listed
No
cUR recognized
Yes
cUR certification
AWM I A according to CSA C22.2 No. 210 (e-file number: E63634)AWM I B according to CSA C22.2 No. 210 (e-file number: E63634)AWM II A according to CSA C22.2 No. 210 (e-file number: E63634)AWM II B according to CSA C22.2 No. 210 (e-file number: E63634)
cUL listed
No
CSA certified
No
VDE certified
No
Flame retardance tested according to UN/ECE-R118
Yes
Documentation
-
Notes
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- HIPERFACE DSL® is a registered trademark of SICK AG; ACURO®link and SCS open link are registered trademarks of Hengstler GmbH.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
Product Family List
All articles from ÖLFLEX® SERVO FD 7DSL
| Article number | Conductor count/size | Copper index | Weight | ||
|---|---|---|---|---|---|
| 1023273 | 4G0,75+(2x0,34)+(2x26AWG) | 97.000 kg/km | 170 kg/km | ||
| 1023274 | 4G1+(2x0,75)+(2x22AWG) | 133.000 kg/km | 202 kg/km | ||
| 1023275 | 4G1,5+(2x22AWG) | 115.000 kg/km | 198 kg/km | ||
| 1023276 | 4G2,5+(2x22AWG) | 160.000 kg/km | 269 kg/km | ||
| 1023277 | 4G4+(2x22AWG) | 218.000 kg/km | 343 kg/km | ||
| 1023278 | 4G1,5+(2x1)+(2x22AWG) | 152.000 kg/km | 256 kg/km | ||
| 1023279 | 4G2,5+(2x1)+(2x22AWG) | 195.000 kg/km | 313 kg/km | ||
| 1023280 | 4G4+(2x1)+(2x22AWG) | 268.000 kg/km | 407 kg/km | ||
| 1023281 | 4G6+(2x1)+(2x22AWG) | 334.000 kg/km | 485 kg/km | ||
| 1023282 | 4G0,5+(2x0,34)+(2x26AWG) | 73.000 kg/km | 132 kg/km |
Why Choose Lapp ?
Why Choose LAPP as a Preferred Partner?
