ÖLFLEX® CLASSIC 100 H 4G1,5
Power and control cable; 4G1.5; U0/U: 450/750 V; HFFR; Core identification: Colours; Flexible
Benefits
- Easy handling and installation due to very flexible design
- Halogen free and highly flame retardant materials reduce the risk of flame propagation, high smoke density and toxic flue gases in the event of a fire.
- Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection on the LAPP website.
- High electrical safety thanks to 4000 V test voltage.
- High oil resistance according to DIN EN 50363-4-1 (TM5), as well as UL OIL RES I and OIL RES II.
- VDE-tested fire behaviour.
Applications
- For structured building cabling for fulfilling special fire protection requirements.
- For universal use for wiring machine-internal and cross-plant control circuits.
- For circuits that require a higher nominal voltage due to their installation.
- Cable design also suitable for torsion applications in wind turbines.
- For fixed installation and occasional flexing without tensile strain.
- Can be used in dry and damp rooms.
- Suitable for medium mechanical stress.
- The HFFR outer sheath is highly resistant to acids and alkalis.
- Flexible use at temperatures down to -30°C.
Technical Attributes
General Information
Brand
ÖLFLEX®
Product type
Power and control cable
Weight
139 kg/km
Copper index
57.600 kg/km
copper index (lb)
387.050 lb/10,000 ft
Electrical Characteristics
Nominal voltage
U0/U: 450/750 V AC rms according to IEC
Fixed installation nominal voltage
U0/U: 0,6/1 kV AC rms according to IEC
Test voltage
4 kV
Max. conductor resistance at 20°C
13.3 Ω/km
Product Design
Cable dimension
4G1.5
Conductor cross-section (mm2)
1.5 mm²
Conductor material
Bare Copper
Conductor design
IEC 60228 class 5: fine-wire
Including protective conductor
Yes
Number of cores
4
Stranding type
Layered Stranding
Shielded
No
Nominal outer diameter
9 mm
Shape of cable
Round
Core insulation base material
Halogen-free compound
Core insulation base material, shortname
HFFR
Base material of outer sheath
Halogen-free compound
Base material of outer sheath, shortname
HFFR
Cable insulation colour
grey
Core identification
Colours
Core colour code
VDE 0293-308
Product Characteristics
Application area
FlexibleFixed Installation
For torsional load
Yes
Minimum bending radius, fixed installation
4 x outer diameter
Minimum bending radius in mm, stationary
36.0 mm
Minimum bending radius, occasionally moved
15 x outer diameter
Minimum bending radius in mm, occasionally flexing
135.0 mm
Torsion
for +/- 150 °/m and min. 5 °C up to 5000 Torsion cyclesfor +/- 150 °/m and min. -40 °C up to 2000 Torsion cycles
temperature, fixed installation
-40 °C to 80 °C
Temperature, occasionally moved
-30 °C to 70 °C
Flame-retardant
Yes
Flame retardance according to
IEC 60332-3-25
Low smoke density according to
IEC 61034-2
Low toxicity of combustion gases
NES 02-713 (≤ 3)
corrosiveness of combustion gases according to
IEC 60754-2
UV-resistant
No
Ozone resistant
Yes
Ozone-resistant according to
EN 50396, method B
Halogenfree
Yes
Zero halogen according to
IEC 60754-1
Oil-resistant
Yes
Oil resistance according to
EN 50363-4-1: TM5UL OILRES IUL OILRES II
PWIS-free
Yes
PWIS-free according to
VDMA 24364-B2-L
Certifications and Standards
CE marked
Yes
EAC certified
Yes
EAC certification number
ЕАЭС N RU Д-DE.АЮ64.В.00130/20
UL recognised
No
UL listed
No
cUR recognized
No
cUL listed
No
CSA certified
No
VDE certified
No
DNV-certified
No
CPR fire class
Cca
CPR smoke density
s2
CPR drip behaviour
d2
CPR acidity
a1
Flame retardance tested according to UN/ECE-R118
No
Tested for fire protection for railway vehicles
No
Documentation
-
Downloads
Further Links
-
Notes
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
Product Family List
All articles from ÖLFLEX® CLASSIC 100 H
| Article number | Number of cores | Including protective conductor | Conductor cross-section (mm2) | Copper index | Weight | CPR fire class | |
|---|---|---|---|---|---|---|---|
| 0014150 | 2 | No | 1.5 mm² | 28.800 kg/km | 90 kg/km | Cca | |
| 0014151 | 3 | Yes | 1.5 mm² | 43.200 kg/km | 113 kg/km | Cca | |
| 0014152 | 4 | Yes | 1.5 mm² | 57.600 kg/km | 139 kg/km | Cca | |
| 0014153 | 5 | Yes | 1.5 mm² | 72.000 kg/km | 175 kg/km | Cca | |
| 0014156 | 2 | No | 2.5 mm² | 48.000 kg/km | 132 kg/km | Cca | |
| 0014157 | 3 | Yes | 2.5 mm² | 72.000 kg/km | 166 kg/km | Cca | |
| 0014158 | 4 | Yes | 2.5 mm² | 96.000 kg/km | 206 kg/km | Cca | |
| 0014159 | 5 | Yes | 2.5 mm² | 120.000 kg/km | 260 kg/km | Cca | |
| 0014162 | 3 | Yes | 4 mm² | 115.200 kg/km | 238 kg/km | Cca | |
| 0014163 | 4 | Yes | 4 mm² | 153.600 kg/km | 302 kg/km | Cca | |
| 0014164 | 5 | Yes | 4 mm² | 192.000 kg/km | 371 kg/km | Cca | |
| 0014166 | 3 | Yes | 6 mm² | 172.800 kg/km | 320 kg/km | Cca | |
| 0014167 | 4 | Yes | 6 mm² | 230.400 kg/km | 399 kg/km | Cca | |
| 0014168 | 5 | Yes | 6 mm² | 288.000 kg/km | 507 kg/km | Cca | |
| 0014170 | 4 | Yes | 10 mm² | 384.000 kg/km | 661 kg/km | B2ca | |
| 0014171 | 5 | Yes | 10 mm² | 480.000 kg/km | 825 kg/km | B2ca | |
| 0014173 | 4 | Yes | 16 mm² | 614.400 kg/km | 956 kg/km | B2ca | |
| 0014174 | 5 | Yes | 16 mm² | 768.000 kg/km | 1192 kg/km | B2ca | |
| 0014176 | 4 | Yes | 25 mm² | 960.000 kg/km | 1479 kg/km | B2ca | |
| 0014177 | 5 | Yes | 25 mm² | 1200.000 kg/km | 1859 kg/km | B2ca | |
| 0014179 | 4 | Yes | 35 mm² | 1344.000 kg/km | 1984 kg/km | B2ca | |
| 0014180 | 5 | Yes | 35 mm² | 1680.000 kg/km | 2487 kg/km | B2ca | |
| 0014182 | 4 | Yes | 50 mm² | 1920.000 kg/km | 2829 kg/km | B2ca | |
| 0014184 | 4 | Yes | 70 mm² | 2688.000 kg/km | 3888 kg/km | B2ca | |
| 0014186 | 4 | Yes | 95 mm² | 3648.000 kg/km | 5107 kg/km | B2ca | |
| 0014188 | 4 | Yes | 120 mm² | 4608.000 kg/km | 6314 kg/km | B2ca |
Why Choose Lapp ?
Why Choose LAPP as a Preferred Partner?
