ÖLFLEX® LIFT N 18G1
Lift cable; 18G1; 60 m; U0/U: 300/500 V; PVC; Core identification: Numbers; With cable messenger; Flexible
Benefits
- The PVC insulating and sheathing material, which is flexible at cold temperatures, make it suitable for both indoors and outdoors.
- As a flat cable, a much more space-saving solution than round cables and therefore ideally suited for confined spaces.
- Flat cables allow considerably smaller bending radii than round cables.
- Suitable for voltage classes 300/500 V or 450/750 V depending on the conductor cross-section.
Applications
- Can be used as a lift control cable with a suspension length of up to 35 m at a maximum speed of travel of 1.6 m/s.
- For use in conveyor and hoisting trucks, cable trailer systems, transport systems, hall cranes, and similar transporting equipment
- The cable design allows flexible, continuously flexing use in moving machine parts and in the cable chain.
- Can be used in dry, damp or wet interiors.
- Suitable for medium mechanical stress.
- The PVC outer sheath is resistant to acids and alkalis and has limited oil resistance.
- Suitable for temporary outdoor use, subject to the temperature range.
Technical Attributes
General Information
Brand
ÖLFLEX®
Product type
Lift cable
Weight
430 kg/km
Copper index
172.800 kg/km
copper index (lb)
1161.160 lb/10,000 ft
Electrical Characteristics
Nominal voltage
U0/U: 300/500 V AC rms according to IEC
Test voltage
4 kV
Max. conductor resistance at 20°C
19.5 Ω/km
Product Design
Cable dimension
18G1
Conductor cross-section (mm2)
1 mm²
Conductor material
Bare Copper
Conductor design
IEC 60228 class 6: extra-fine wire
Including protective conductor
Yes
Number of cores
18
Stranding type
Layered Stranding
Wrapping over stranding
Fleece wrapping
With cable messenger
Yes
Supporting element type
Plastic Fibres
Strain relief due to
Aramid yarns
Nominal outer diameter
16.3 mm
Shape of cable
Round
Core insulation base material
Polyvinylchloride
Core insulation base material, shortname
PVC
Base material of outer sheath
Polyvinylchloride
Base material of outer sheath, shortname
PVC
Cable insulation colour
black
Core identification
Numbers
Core colour code
VDE 0293-1
Product Characteristics
Application area
FlexibleFixed Installation
For continuous flexing
Yes
Windable
No
Minimum bending radius, occasionally moved
20 x outer diameter
Minimum bending radius in mm, occasionally flexing
326.0 mm
Maximum suspension length
60 m
Temperature, occasionally moved
-15 °C to 70 °C
Flame-retardant
Yes
Flame retardance according to
IEC 60332-1-2
UV-resistant
Yes
Halogenfree
No
Oil-resistant
No
Certifications and Standards
CE marked
Yes
EAC certified
Yes
EAC certification number
ЕАЭС N RU Д-DE.АЮ64.В.00130/20
VDE certified
No
Flame retardance tested according to UN/ECE-R118
No
Documentation
-
Downloads
-
Notes
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
Product Family List
All articles from ÖLFLEX® LIFT N
| Article number | Number of cores | Including protective conductor | Conductor cross-section (mm2) | Maximum suspension length | Copper index | Weight | |
|---|---|---|---|---|---|---|---|
| 2027019 | 5 | Yes | 1 mm² | 50 m | 48.000 kg/km | 129 kg/km | |
| 2027020 | 7 | Yes | 1 mm² | 80 m | 67.200 kg/km | 190 kg/km | |
| 2027022 | 12 | Yes | 1 mm² | 80 m | 115.200 kg/km | 370 kg/km | |
| 2027024 | 18 | Yes | 1 mm² | 60 m | 172.800 kg/km | 430 kg/km | |
| 2027027 | 24 | Yes | 1 mm² | 60 m | 230.400 kg/km | 595 kg/km | |
| 2027029 | 36 | Yes | 1 mm² | 90 m | 345.600 kg/km | 815 kg/km |
Why Choose Lapp ?
Why Choose LAPP as a Preferred Partner?
