SKINTOP® MS-M ATEX BRUSH PLUS 63X1.5
Cable gland; M 63; Clamping range (min./max.): 44 - 55 mm; Wrench width 1: 75; Brass Nickel-plated; UV-resistant; IP 68 - 10 bar (30 min), IP 66; Suitable for EX-applications; EMC screening
Benefits
- Optimum EMC protection thanks to the unique 360° brass brush, which creates a low-resistance contact between the copper braided screening and the gland.
- Reliable EMC protection is guaranteed even after dismantling and reinstallation, as the copper braided screening is not damaged by the brass brush.
- Approval for potentially explosive atmospheres in accordance with ATEX Directive 2014/34/EU.
- Safe, fast and uncomplicated installation.
- The best possible sealing enables protection class IP 68 (10 bar).
Applications
- For EMC-compliant insertion of copper-screened cables.
- For use in devices, machines and systems of the “Enhanced Safety” ignition protection type ("e").
- For use on devices, machines and systems with protection type "protection by housing" ("t").
- For equipment group II, categories 2G and 1D.
- Particularly in potentially explosive atmospheres in the chemical and petrochemical industry.
- Withstands high chemical and mechanical loads.
Technical Attributes
General Information
Brand
SKINTOP®
Product type
Cable gland
Including lock nut
No
Including o-ring
Yes
Packaging type
Bag
Delivery Unit
1.000
Product Design
For armoured cables
No
Number of cable entries
1 pc.
Bending protection
No
Cable gland design
Straight
Total length
69 mm
Clear width
47 mm
Thread size
M 63
Pitch of thread
1,5
Thread length
15 mm
Thread standard
DIN EN 60423
Wrench width 1
75 mm
Wrench size 2
75 mm
Hexagonal edge size
83.9 mm
Min. clamping range
44 mm
Max. clamping range
55 mm
EMC screening
Yes
Insert material
Polyamide
Insert material, short form
PA
Seal type
Conduit Sealing Ring
O-ring material
Acrylonitrile butadiene rubber
Material o-ring shortname
NBR
Sealing material
Chloroprene rubber
Sealing material, short form
CR
Material body
Brass
Material body shortname
CuZn
Surface protection
Nickel-plated
Product Characteristics
Suitable for EX-applications
Yes
Min. temperatur
-30 °C
Temperature (max.)
90 °C
Temperature min.
-30 °C
Temperature max.
90 °C
Flame-retardant
Yes
UV-resistant
Yes
Chemical resistant
Yes
Acid-resistant
No
Corrosion-resistant
Yes
Halogenfree
No
Oil-resistant
Yes
lead free
No
Impact-resistant
Yes
Vibration protection
Yes
Strain relief
Yes
Certifications and Standards
CE marked
Yes
UKCA marked
Yes
UL recognised
No
UL listed
No
cUR recognized
No
cUL listed
No
CSA certified
No
VDE certified
No
ATEX certification
IECEx IBE 13.0026X : Ex II 2G Ex eb IIC Ex II 1D Ex ta IIIC
CCCex-certified
Yes
GGVS certified
No
DNV-certified
Yes
Tested for fire protection for railway vehicles
No
Ecolab certified
No
NSF certified
No
FDA certified
No
EHEDG certified
No
Documentation
-
Downloads
-
Notes
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.
Product Family List
All articles from SKINTOP® MS-M ATEX BRUSH
Why Choose Lapp ?
Why Choose LAPP as a Preferred Partner?
