ED-CAN-90-PG-PRO
Data connector; CAN; Sub-D Plug/Socket; Angled (90 °); Switchable Bus Terminator; diagnostic interface
Benefits
- Robust housing material for harsh environments
- Cost-saving due to quick and easy installation
- For EMC critical environments
- High flexibility by extended cable clamping range
Technical Attributes
General Information
Brand
EPIC®
Product type
Data connector
Weight
0.105 kg
Delivery Unit
1.000
valid Fieldbus or Ethernet System
CAN
Electrical Characteristics
Impedance
120 Ω
Product Design
Shielded
Yes
Total length
62.5 mm
Overall width
45.1 mm
Overall height
17.5 mm
Design connector housing
Angled
Coded
No
With thread
No
Connector format
Sub-D
Connector type
Plug/Socket
Angle of connector housing
90
EMC screening
Yes
For cable outer diameter min.
7 mm
For max. cable outer diameter
9 mm
Reusable
Yes
assembling type
Field Configurable
Min. connectable conductor cross-section fine-wire (AWG)
28 AWG
Max. connectable conductor cross-section fine-wire (AWG)
14 AWG
Housing base material
Zinc alloy
Housing base material, short form
Zn
diagnostic interface
Yes
Pin assignment
CAN Low = Pin 2CAN Gnd = Pin 3CAN High = Pin 7CAN V+ = Pin 9
Product Characteristics
Variant of the Sub-D
Switchable Bus Terminator
Min. number of plug cycles
200
Suitable for EX-applications
No
Operating temperature min.
-20 °C
Operating temperature max.
70 °C
UV-resistant
No
Contact type application
Data / Signals
Fast Connect (FC) cable
No
Certifications and Standards
CE marked
Yes
UKCA marked
Yes
EAC certified
Not required
EAC certification number
Отказное письмо № 39
UL recognised
No
UL listed
No
cUR recognized
No
cUL listed
No
CSA certified
No
Documentation
-
Notes
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- DeviceNet is a registered trademark of the user organisation ODVA.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.