ÖLFLEX® CLASSIC 130 H 3G1,5
Control cable; 3G1.5; 6.8 mm; U0/U: 300 / 500 V; HFFR; Core identification: Numbers; UL recognised; Flexible
Benefits
- Easy handling and installation due to its flexible design.
- Halogen free and highly flame retardant materials reduce the risk of flame propagation, high smoke density and toxic flue gases in the event of a fire.
- Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection at www.lappkabel.de/cpr.
- High electrical safety thanks to 4000 V test voltage.
- UL certification according to technical data enables the product to be used on the North American market.
- VDE-tested fire behaviour.
- DNV-GL approval for maritime use.
Applications
- For building cabling that needs to meet special fire safety requirements.
- For universal use for wiring of cross-plant control circuits and control circuits inside machines.
- For fixed installation and occasional flexing without tensile strain.
- Can be used in dry and damp environments.
- Suitable for medium mechanical stress.
- The HFFR outer sheath is highly resistant to acids and alkalis.
- Suitable for temporary outdoor use, subject to the temperature range.
- Flexible use at temperatures down to -25°C.
Technical Attributes
General Information
Brand
ÖLFLEX®
Product type
Control cable
weight
0.088 kg
Copper index (lb)
290.300 lb
copper index
43.200 kg
Electrical Characteristics
Nominal voltage
U0/U: 300 / 500 V AC rms / DC after IEC
Rated voltage
600 V AC rms after UL AWM
Test voltage
4 kV
Product Design
Cable dimension
3G1.5
Nominal conductor cross-section (mm2)
1.5 mm²
Nominal conductor cross-section (AWG)
16 AWG
Conductor material
Bare Copper
conductor design
IEC 60228 class 5: fine-wire
Including protective conductor
Yes
Number of cores
3
Type of stranding
Twisted into layers
Shielded
No
Nominal outer diameter
6.8 mm
Shape of cable
Round
Core insulation base material
Halogen-free compound
Core insulation basic material, short form
HFFR
Base material outer sheath
Halogen-free compound
Basic material of outer sheath, short form
HFFR
Outer sheath colour
Grey
Core identification
Numbers
core colour code
VDE 0293-1EN 50334
Product Characteristics
Application type
FlexibleFixed Installation
For torsional load
No
Minimum bending radius, fixed installation
4 x outer diameter
Minimum bending radius in mm, fixed installation
27.2 mm
Minimum bending radius, occasionally moved
15 x outer diameter
Minimum bending radius in mm, occasionally moved
102.0 mm
Temperature, fixed installation
-40 °C to 80 °C to 75 °C after UL AWM
Temperature, occasional flexing
to 75 °C after UL AWM-25 °C to 70 °C
Flame-retardant
Yes
Flame retardance according to
UL Horizontal Flame Test
Low smoke density according to
IEC 61034-2
low toxicity of combustion gases
NES 02-713 (≤ 3)
Corrosiveness of combustion gases according to
IEC 60754-2
UV-resistant
Yes
UV-resistant according to
EN 50620
ozone resistant
Yes
Ozone-resistant according to
EN 50396, method B
Halogen-free
Yes
Zero halogen according to
IEC 60754-1
Oil resistant
No
PWIS-free
Yes
Certifications and Standards
CE marking
Yes
UKCA marked
Yes
EAC certified
Yes
EAC certification number
ЕАЭС N RU Д-DE.АЮ64.В.00130/20
UL recognised
Yes
UL AWM certification
21217 after UL 758 (e-file number: E63634)
UL listed
No
cUR recognised
No
cUL listed
No
CSA certified
No
VDE certified
No
DNV/GL certified
Yes
DNV/GL certification Number
TAE00002RJ
CPR fire behaviour classified
Dca
CPR smoke density
s1b
CPR drip behaviour
d1
CPR acidity
a1
Flame retardance tested according to UN/ECE-R118
No
Fire protection tested for rail vehicles
No
Documentation
-
Notes
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- Please find our standard lengths at: www.lappkabel.de/kabel-standardlaengen.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they available and have been released for publication.
Product Family List
All articles from ÖLFLEX® CLASSIC 130 H
| Article number | copper index | weight | Nominal outer diameter | Number of cores | Including protective conductor | Nominal conductor cross-section (mm2) |
|---|---|---|---|---|---|---|
| 1123002 | 14.400 kg | 0.042 kg | 5.4 mm | 3 | No | 0.5 mm² |
| 1123046 | 72.000 kg | 0.149 kg | 9.8 mm | 10 | Yes | 0.8 mm² |
| 1123047 | 86.400 kg | 0.172 kg | 10.1 mm | 12 | Yes | 0.8 mm² |
| 1123067 | 28.800 kg | 0.067 kg | 6.1 mm | 3 | Yes | 1.0 mm² |
| 1123068 | 28.800 kg | 0.067 kg | 6.1 mm | 3 | No | 1.0 mm² |
| 1123071 | 48.000 kg | 0.096 kg | 7.3 mm | 5 | Yes | 1.0 mm² |
| 1123072 | 48.000 kg | 0.100 kg | 7.3 mm | 5 | No | 1.0 mm² |
| 1123074 | 67.200 kg | 0.130 kg | 8.1 mm | 7 | Yes | 1.0 mm² |
| 1123075 | 67.200 kg | 0.130 kg | 8.1 mm | 7 | No | 1.0 mm² |
| 1123107 | 43.200 kg | 0.088 kg | 6.8 mm | 3 | Yes | 1.5 mm² |
| 1123108 | 43.200 kg | 0.088 kg | 6.8 mm | 3 | No | 1.5 mm² |
| 1123109 | 57.600 kg | 0.110 kg | 7.4 mm | 4 | Yes | 1.5 mm² |
| 1123114 | 100.800 kg | 0.174 kg | 9.0 mm | 7 | Yes | 1.5 mm² |
| 1123140 | 72.000 kg | 0.137 kg | 8.3 mm | 3 | Yes | 2.5 mm² |
| 1123144 | 120.000 kg | 0.217 kg | 10.1 mm | 5 | Yes | 2.5 mm² |
| 1123153 | 600.000 kg | 0.969 kg | 21.1 mm | 25 | Yes | 2.5 mm² |
| 1123159 | 115.200 kg | 0.213 kg | 9.8 mm | 3 | Yes | 4.0 mm² |
| 1123177 | 614.400 kg | 0.917 kg | 18.8 mm | 4 | Yes | 16.0 mm² |
| 1123181 | 960.000 kg | 1.418 kg | 23.5 mm | 4 | Yes | 25.0 mm² |
Why Choose LAPP?
LAPP manufactures the highest quality cable, connectors, glands and industrial communication solutions to enhance factory automation and future-ready industrial manufacturing production systems and equipment. LAPP's state of the art manufacturing plant headquartered in Florham Park, N.J. includes an inhouse UL Client Data Program and UL certified laboratory to ensure the highest quality.