44420260
Contact for design: Powerlock A1 C; ; Drain; Thread for cable lug; For cross-section (min./max.): 35mm² - 240mm²; Copper alloy Silver-plated
EPIC® POWERLOCK SP C M12 (1)
Add to product comparison
Price
Register for price
Please observe the minimum order quantity of 1 PC.
Login for the stock inquiry.
Benefits
- Screw contact for easy-to-service connection without special tools. Screw contact drain for use with type F6 S. Screw contact source for use with type D6 S. Screw contacts are intended for conductor cross-sections up to 120 mm² (0.19 in²). For smaller conductor cross-sections up to 50 mm² (0.08 in²), a diameter reduction must be used.
- Crimp contact ensures maximum contact reliability between the contact and the cable and establishes a vibration-resistant connection. Different contact sizes available for conductor cross-sections from 35 to 240 mm² (0.05 to 0.37 in²). Crimp contact, drain for use with type F6 C; crimp contact source for use with type D6 C.
- M12 threaded post contact for tube cable lug contact. Contact drain for use with type A1. Contact source for use with design type A6 (depending on application either screw or crimp).
- All contacts are supplied with contact retention pin for fastening the contact to the panel-mount base.
Application
- Can be used for mobile and stationary power supply or emergency power supply via generators or battery storage systems.
- Suitable for electric motors and cooling units.
- Suitable for three-phase and direct current applications. The maximum current strength in combination with screw contacts is 400 A. The maximum current strength in combination with crimp contacts is 660 A.
- For use with unshielded single conductors.
- Withstands moderate mechanical stress.