ÖLFLEX® CLASSIC 110 LT 25G2,5
Control cable; 25G2.5; 20.8 mm; U0/U: 300 / 500 V; PVC; Core identification: Numbers; Flexible
Benefits
- Suitable for use at low temperatures thanks to insulating and sheathing materials that are flexible at cold temperatures.
- Space-saving due to small outer diameters.
- High-quality alternative to control cable types YSLY or YY
- High electrical safety thanks to 4000 V test voltage.
- Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection at www.lappkabel.de/cpr.
Applications
- For universal use for wiring of cross-plant control circuits and control circuits inside machines.
- For fixed installation and occasional flexing without tensile strain.
- Cable design suitable for torsion applications in wind turbines.
- Can be used in dry, damp or wet environments.
- Suitable for medium mechanical stress.
- The PVC outer sheath is resistant to acids and alkalis and has limited oil resistance.
- Suitable for outdoor use, subject to the temperature range.
- Flexible use at temperatures down to -30°C.
Technical Attributes
General Information
Brand
ÖLFLEX®
Product type
Control cable
weight
0.890 kg
Copper index (lb)
4031.835 lb
copper index
600.000 kg
Electrical Characteristics
Nominal voltage
U0/U: 300 / 500 V AC rms after IEC
Test voltage
4 kV
Product Design
Cable dimension
25G2.5
Nominal conductor cross-section (mm2)
2.5 mm²
Conductor material
Bare Copper
conductor design
IEC 60228 class 5: fine-wire
Including protective conductor
Yes
Number of cores
25
Type of stranding
Twisted into layers
Shielded
No
With armour
No
Nominal outer diameter
20.8 mm
Shape of cable
Round
Core insulation base material
Polyvinylchloride
Core insulation basic material, short form
PVC
Base material outer sheath
Polyvinylchloride
Basic material of outer sheath, short form
PVC
Outer sheath colour
Black
Core identification
Numbers
core colour code
VDE 0293-1EN 50334
Product Characteristics
Application type
FlexibleFixed Installation
For permanent bending
No
For torsional load
Yes
Minimum bending radius, fixed installation
4 x outer diameter
Minimum bending radius in mm, fixed installation
83.2 mm
Minimum bending radius, occasionally moved
15 x outer diameter
Minimum bending radius in mm, occasionally moved
312.0 mm
torsion
for +/- 150 °/m and min. 5 °C up to 5000 Torsion cyclesfor +/- 150 °/m and min. -40 °C up to 2000 Torsion cycles
Temperature, fixed installation
-40 °C to 80 °C
Temperature, occasional flexing
-30 °C to 70 °C
Flame-retardant
Yes
Flame retardance according to
IEC 60332-1-2
UV-resistant
Yes
UV-resistant according to
DIN EN ISO 4892-2 method AEN 50525-1 (cables with a black sheath are suitable for permanent outdoor use)
ozone resistant
Yes
Ozone-resistant according to
EN 50396, method B
Chemical resistant
Yes
Halogen-free
No
Oil resistant
No
Certifications and Standards
CE marking
Yes
UKCA marked
Yes
EAC certified
Yes
EAC certification number
ЕАЭС N RU Д-DE.АЮ64.В.00130/20
VDE certified
No
DNV/GL certified
No
CPR fire behaviour classified
Eca
Flame retardance tested according to UN/ECE-R118
No
Ecolab certified
No
Documentation
-
Notes
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they available and have been released for publication.
Product Family List
All articles from ÖLFLEX® CLASSIC 110 LT
| Article number | Number of cores | Including protective conductor | Nominal conductor cross-section (mm2) | Nominal outer diameter | copper index | weight |
|---|---|---|---|---|---|---|
| 1120730 | 2 | No | 0.75 mm² | 5.4 mm | 14.400 kg | 0.045 kg |
| 1120737 | 12 | Yes | 0.75 mm² | 9.9 mm | 86.400 kg | 0.171 kg |
| 1120741 | 3 | No | 1 mm² | 6 mm | 28.800 kg | 0.065 kg |
| 1120746 | 7 | Yes | 1 mm² | 8 mm | 67.200 kg | 0.126 kg |
| 1120755 | 5 | No | 1.5 mm² | 8.1 mm | 72.000 kg | 0.128 kg |
| 1120767 | 12 | Yes | 2.5 mm² | 14.8 mm | 288.000 kg | 0.445 kg |
| 1120768 | 18 | Yes | 2.5 mm² | 17.8 mm | 432.000 kg | 0.648 kg |
| 1120769 | 25 | Yes | 2.5 mm² | 20.8 mm | 600.000 kg | 0.890 kg |
Why Choose LAPP?
LAPP manufactures the highest quality cable, connectors, glands and industrial communication solutions to enhance factory automation and future-ready industrial manufacturing production systems and equipment. LAPP's state of the art manufacturing plant headquartered in Florham Park, N.J. includes an inhouse UL Client Data Program and UL certified laboratory to ensure the highest quality.