ÖLFLEX® CLASSIC 110 Black 0,6/1kV 4G16
Control cable; 4G16; 21.3 mm; U0/U: 0,6 / 1 kV; PVC; Core identification: Numbers; Flexible
Benefits
- Weatherproof and therefore well suited for outdoor use.
- Very robust due to reinforced outer sheath with a wall thickness of at least 1.8 mm.
- High electrical safety thanks to 4000 V test voltage.
- Classified fire behaviour according to EU Directive 305/2011 (BauPVO/CPR) with article number selection at www.lappkabel.de/cpr.
Applications
- For universal use for wiring of cross-plant control circuits and control circuits inside machines.
- For circuits that require a higher nominal voltage due to their installation.
- Cable design suitable for torsion applications in wind turbines.
- For fixed installation and occasional flexing without tensile strain.
- Suitable for medium mechanical stress.
- Can be used in dry and damp rooms.
- The PVC outer sheath is resistant to acids and alkalis and has limited oil resistance.
- Suitable for outdoor use, subject to the temperature range.
Technical Attributes
General Information
Brand
ÖLFLEX®
Product type
Control cable
weight
1.100 kg
Copper index (lb)
4125.850 lb
copper index
614.000 kg
Electrical Characteristics
Nominal voltage
U0/U: 0,6 / 1 kV AC rms after IEC
Test voltage
4 kV
Product Design
Cable dimension
4G16
Nominal conductor cross-section (mm2)
16 mm²
Conductor material
Bare Copper
conductor design
IEC 60228 class 5: fine-wire
Including protective conductor
Yes
Number of cores
4
Type of stranding
Twisted into layers
Shielded
No
With armour
No
Nominal outer diameter
21.3 mm
Shape of cable
Round
Core insulation base material
Polyvinylchloride
Core insulation basic material, short form
PVC
Base material outer sheath
Polyvinylchloride
Basic material of outer sheath, short form
PVC
With reinforced outer jacket
Yes
Outer sheath colour
Black
Core identification
Numbers
core colour code
VDE 0293-1EN 50334
Product Characteristics
Application type
FlexibleFixed Installation
For permanent bending
No
For torsional load
Yes
Minimum bending radius, fixed installation
4 x outer diameter
Minimum bending radius in mm, fixed installation
85.2 mm
Minimum bending radius, occasionally moved
15 x outer diameter
Minimum bending radius in mm, occasionally moved
319.5 mm
torsion
for +/- 150 °/m and min. 5 °C up to 5000 Torsion cyclesfor +/- 150 °/m and min. -20 °C up to 2000 Torsion cycles
Temperature, fixed installation
-40 °C to 80 °C
Temperature, occasional flexing
-5 °C to 70 °C
Flame-retardant
Yes
Flame retardance according to
IEC 60332-1-2
UV-resistant
Yes
UV-resistant according to
DIN EN ISO 4892-2 method AEN 50525-1 (cables with a black sheath are suitable for permanent outdoor use)
ozone resistant
Yes
Ozone-resistant according to
EN 50396, method B
Chemical resistant
Yes
Halogen-free
No
Oil resistant
No
PWIS-free
Yes
Certifications and Standards
CE marking
Yes
UKCA marked
Yes
EAC certified
Yes
EAC certification number
ЕАЭС RU С-DE.АЮ64.В.00091/19
VDE certified
No
DNV/GL certified
No
CPR fire behaviour classified
Eca
Flame retardance tested according to UN/ECE-R118
No
Ecolab certified
No
Documentation
-
Notes
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- Please find our standard lengths at: www.lappkabel.de/kabel-standardlaengen.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they available and have been released for publication.
Product Family List
All articles from ÖLFLEX® CLASSIC 110 BLACK 0,6/1 kV
| Article number | Including protective conductor | Number of cores | Nominal conductor cross-section (mm2) | Nominal outer diameter | weight | copper index |
|---|---|---|---|---|---|---|
| 1120309 | Yes | 4 | 1.5 mm² | 10.8 mm | 0.170 kg | 58.000 kg |
| 1120314 | Yes | 7 | 1.5 mm² | 12.6 mm | 0.261 kg | 101.000 kg |
| 1120340 | Yes | 3 | 2.5 mm² | 11.3 mm | 0.178 kg | 72.000 kg |
| 1120366 | Yes | 4 | 6.0 mm² | 15.1 mm | 0.442 kg | 230.000 kg |
| 1120370 | Yes | 4 | 10.0 mm² | 18.7 mm | 0.707 kg | 384.000 kg |
| 1120374 | Yes | 4 | 16.0 mm² | 21.3 mm | 1.100 kg | 614.000 kg |
| 1120385 | Yes | 4 | 50.0 mm² | 35.6 mm | 3.400 kg | 1920.000 kg |
| 1120389 | Yes | 4 | 95.0 mm² | 46.8 mm | 6.010 kg | 3648.000 kg |
| 1120390 | Yes | 4 | 120.0 mm² | 53.5 mm | 7.500 kg | 4608.000 kg |
Why Choose LAPP?
LAPP manufactures the highest quality cable, connectors, glands and industrial communication solutions to enhance factory automation and future-ready industrial manufacturing production systems and equipment. LAPP's state of the art manufacturing plant headquartered in Florham Park, N.J. includes an inhouse UL Client Data Program and UL certified laboratory to ensure the highest quality.