EPIC® H-A 4 BS
Insert with screw connection Socket; Number of contacts: 4+PE; Design size: 3A; 400 V AC rms / DC according to IEC; 10 A according to UL; For cross-section (min./max.): 0.5mm² - 2.5mm²; Contacts included; Polyamide
Unit | Per Unit | Per MOQ |
---|---|---|
1 | ₹416.29 | ₹416.29 |
50 | ₹333.03 | ₹16,651.50 |
250 | ₹291.40 | ₹72,850.00 |
500+ | ₹258.10 | ₹129,050.00 |
Benefits
- The small H-A 3 / H-A 4 are used whenever there is minimal space.
- Easy to service screw connection
- Easy cable connection with strait cable entry in the contacts
- Railway applications - Fire protection on railway vehicles: Test according EN 45545-2. Requirement sets R22 and R23. Hazard level HL1, HL2 and HL3
Applications
- Machine and equipment manufacturing
- Control engineering
- Apparatus construction
- Railway applications / vehicle construction
Technical Attributes
General Information
Brand
EPIC®
Product type
Insert with screw connection
Design size
3A
Scope of delivery
including screws
Contacts included
Yes
Weight
21.850 g
Delivery Unit
10.000
Electrical Characteristics
Rated voltage
400 V AC rms / DC according to IEC600 V AC rms / DC according to UL
Rated impulse voltage
4 kV AC rms / DC according to IEC 61984
Rated current
10 A according to UL23 A according to IEC
Over voltage category
III
Max. contact resistance
4 mΩ
Protective conductor integrated into insert
Yes
Product Design
Number of contacts
4+PE
Number of power contacts
4
Number of PE contacts
1
Contact diameter
1.6 mm
Contact variant
Socket
Contact manufacturing method
Machined
Contact insert type
Socket
With wire protection
No
With protective conductor
Yes
Connector type
Socket
Contact insert without contacts
No
EMC screening
No
Conductor connection type
Screw connection
Connection type PE
Screw connection
Stripping length of the individual wire
6 mm
Stripping length of PE connection
6 mm
Connectable conductor cross section min. (AWG)
20 AWG
Connectable conductor cross section max. (AWG)
14 AWG
Min. connectable conductor cross-section (mm2)
0.5 mm²
Max. connectable conductor cross-section (mm2)
2.5 mm²
Insert material
Polyamide
Insert material, short form
PA
Material contact
Brass
Contact material, short form
CuZn
Material contact surface
Silver-plated
Material contact surface shortname
Ag
Contact insert material
Polyamide
Material contact insert shortname
PA
Colour
grey
Product Characteristics
Min. number of plug cycles
100
Pollution degree
3
Suitable for EX-applications
No
Short-term temperature peak
125 °C
Operation temperature min.
-40 °C
Max. operating temperature
100 °C
Flame-retardant
Yes
Flame retardance according to
UL 94 V-0
UV-resistant
No
Chemical resistant
No
Acid-resistant
No
Halogenfree
Yes
Minimum tightening torque for PE connection
0.5 Nm
Maximum tightening torque PE
0.5 Nm
Impact-resistant
Yes
Vibration protection
No
Certifications and Standards
CE marked
Yes
UKCA marked
Yes
EAC certified
Not required
EAC certification number
Отказное письмо № 39
UR recognised
Yes
UR certification
according to UL 1977 (e-file number: E75770)
UL category control number
ECBT2
cUR recognized
No
cUR certification
after CSA C22.2 No. 182.3 (e-file number: E75770)
cUR category control number
ECBT8
CSA certified
No
VDE certified
Yes
VDE registration number
B437
Product standard according to IEC
IEC 61984
TÜV certified
No
Tested for fire protection for railway vehicles
No
Documentation
-
Notes
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.