EPIC® H-BS 6 SS DR
Insert with screw connection Pin; Number of contacts: 6+PE; Design size: 16B; 500 V AC rms / DC according to IEC; 35 A according to IEC; For cross-section (min./max.): 0.5mm² - 6mm²; Contacts included; Polycarbonate
Unit | Per Unit | Per MOQ |
---|---|---|
1 | ₹1,354.17 | ₹1,354.17 |
50 | ₹1,083.34 | ₹54,167.00 |
250 | ₹947.92 | ₹236,980.00 |
500+ | ₹839.59 | ₹419,795.00 |
Benefits
- High rating for currents up to 35 A
- Screw termination up to a conductor cross section of 6 mm²
- Railway applications - Fire protection on railway vehicles: Test according EN 45545-2. Requirement sets R22 and R23. Hazard level HL1, HL2 and HL3
Applications
- Plant engineering
- Mechanical engineering
- Drive systems
- Railway applications / vehicle construction
Technical Attributes
General Information
Brand
EPIC®
Product type
Insert with screw connection
Design size
16B
Contacts included
Yes
Weight
87.700 g
Delivery Unit
5.000
Electrical Characteristics
Rated voltage
500 V AC rms / DC according to IEC600 V AC rms / DC according to UL/CSA
Rated impulse voltage
6 kV AC rms / DC according to IEC 61984
Rated current
35 A according to IEC35 A according to UL/CSA
Over voltage category
III
Max. contact resistance
2 mΩ
Protective conductor integrated into insert
Yes
Product Design
Number of contacts
6+PE
Number of power contacts
6
Number of PE contacts
1
Contact diameter
3.5 mm
Contact variant
Pin
Contact manufacturing method
Machined
Contact insert type
Plug
With wire protection
Yes
With protective conductor
Yes
Connector type
Plug
Contact insert without contacts
No
EMC screening
No
Conductor connection type
Screw connection
Connection type PE
Screw connection
Connectable conductor cross section min. (AWG)
20 AWG
Connectable conductor cross section max. (AWG)
12 AWG
Min. connectable conductor cross-section (mm2)
0.5 mm²
Max. connectable conductor cross-section (mm2)
6 mm²
Material contact
Brass
Contact material, short form
CuZn
Material contact surface
Silver-plated
Material contact surface shortname
Ag
Contact insert material
Polycarbonate
Material contact insert shortname
PC
Colour
grey
Product Characteristics
Min. number of plug cycles
100
Pollution degree
3
Suitable for EX-applications
No
Short-term temperature peak
125 °C
Operation temperature min.
-40 °C
Max. operating temperature
100 °C
Flame-retardant
Yes
Flame retardance according to
UL 94 V-0
UV-resistant
No
Chemical resistant
No
Acid-resistant
No
Halogenfree
Yes
Minimum tightening torque for PE connection
2 Nm
Maximum tightening torque PE
2 Nm
Impact-resistant
Yes
Vibration protection
No
Certifications and Standards
CE marked
Yes
UKCA marked
Yes
EAC certified
Not required
EAC certification number
Отказное письмо № 39
UR recognised
Yes
UR certification
according to UL 1977 (e-file number: E75770) according to UL 2237 (e-file number: E483837)
UL category control number
ECBT2
cUR recognized
Yes
cUR certification
according to CSA C22.2 No. 182.3 (e-file number: E75770)
CSA certified
No
CSA certification
after CSA C22.2 No. 182.3
VDE certified
Yes
VDE registration number
B437
Product standard according to IEC
IEC 61984
TÜV certified
No
Tested for fire protection for railway vehicles
Yes
Fire protection for railway vehicles hazard level
EN 45545-2 HL3
Documentation
-
Notes
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.