UNITRONIC® BUS L2/FIP (SWA) 1x2x0,64 BK
Bus cable; PROFIBUS DP; Fixed Installation; Nominal characteristic impedance: 150; 1X2X22AWG; Fast Connect (FC) cable; PVC; Flame-retardant: IEC 60332-1-2; UV-resistant; black; 8 mm
Technical Attributes
General Information
Brand
UNITRONIC®
Product type
Bus cable
valid Fieldbus or Ethernet System
PROFIBUS DP
Electrical Characteristics
Test voltage
1.2 kV
DC loop resistance at 20°C
115 Ω/km
Nominal characteristic impedance
150 Ω
tolerance of nominal characteristic impedance
+/- 15Ω
Product Design
Nominal cross section conductor (AWG)
22 AWG
Nominal conductor diameter (mm)
0.64 mm
Number of wires
1
Conductor material
Bare Copper
Including protective conductor
No
Number of cores
2
Number of pairs
1
Stranding type
Twisted-pair
Shielded
Yes
Type of overall screen
Aluminium-laminated plastic foilTin-plated copper braiding
With armouring
Yes
Armouring type
Steel wire wrapping
Shape of cable
Round
Core insulation base material
Polyethylene foam
Core insulation base material, shortname
Foam-Skin PE
Basic material of inner sheath
Polyvinylchloride
Basic material of inner sheath, short form
PVC
colour inner sheath
violet
Base material outer sheath
Polyvinylchloride
Base material outer sheath, shortname
PVC
Cable insulation colour
black
Product Characteristics
Application area
Fixed Installation
Minimum bending radius, fixed installation
10 x outer diameter
Minimum bending radius in mm, fixed installation
80.0 mm
Temperature, fixed installation
-40 °C to 80 °C
Flame-retardant
Yes
Flame retardance according to
IEC 60332-1-2
UV-resistant
Yes
Halogenfree
No
Oil-resistant
No
Fast Connect (FC) cable
Yes
Certifications and Standards
CE marked
Yes
UKCA marked
Yes
UL recognised
No
UL listed
No
cUR recognized
No
cUL listed
No
CSA certified
No
VDE certified
No
TÜV certified
No
Documentation
-
Notes
- Photographs and graphics are not to scale and do not represent detailed images of the respective products.
- Unless specified otherwise, the product values shown are rated values at room temperature. You can receive further values, such as tolerances, upon request if they are available and have been released for publication.